更换 ZD611T 打印头
更换 ZD611T 打印头
View content for :
Product:

更换
ZD611T
打印头

此过程将指导您更换打印头。
在开始维修之前,请先阅读此过程。
  • 关闭打印机电源。
  • 打开打印机盖以便露出打印头 (1)。
打印头会在打印过程中变热。为防止打印头受损以及发生人身伤害的危险,切勿触摸打印头。只能使用清洁笔进行打印头维护。
人体皮肤或其他表面聚集的静电能量一旦释放,可能会损坏或破坏打印头和设备使用的其他电子元件。处理打印头或顶盖下的电子元件时,必须遵循防静电规程。
Shows the printhead with its ESD  and Hot Surface warnings
  1. 将打印头的松开锁片推向打印头方向(绿色所示)。打印头右侧向下松开并脱离打印头锁臂 (1)。
    Shows the printhead released and swinging out.
  2. 来回摆动松开的打印头右侧,将其拉出打印机。稍微向右侧拉动,拉出打印头左侧。将打印头轻轻向下拉,使其脱离入色带夹,以便露出其连接电缆。
    Shows the printhead released and swinging out.
  3. 小心地将两个打印头电缆束连接器从打印头上用力拉下。
    Shows the printhead released and swinging out.
    1 — 连接器
    2 — 打印头总成
  4. 将打印头与打印机对齐。将右侧的打印头电缆连接器推入打印头。连接器带有键槽,只能单向推入。
  5. 将左侧的打印头电缆连接器推入打印头。
    Shows the new printhead being connected.
  6. 将打印头总成上的中心翼片插入色带夹中打印头安装支架上的中心槽中。
    Shows the center printhead alignment tab inserting into the slot on the printhead actuator arm.
  7. 将打印头总成的左侧翼片插入色带夹左侧的凹槽中。
    Shows the printhead assembly's left side tab and slot .
  8. 将打印头右侧推入打印机,直到锁片将打印头右侧锁入打印机。
    Shows the right side of hte printhead locking in.
  9. 在施加压力时,确保打印头能够上下自由移动;在释放压力时,确保打印头能保持在锁定位置。
    Shows pushing the printhead to verify the printhead is latched correctly.
  1. 清洁打印头。使用一根新清洁笔,将打印头上的油渍(手指印)和污渍擦除。从中心位置向外侧清洁打印头。请参阅清洁 ZD611T 打印头
  2. 插好断开的打印机电源。
  3. 装入全宽标签或收据纸卷。用全宽卷打印可验证打印头功能的方方面面。
  4. 打印配置报告。请参阅打印配置报告以测试打印