The ZB200 Bridge comes with a wall mounting bracket which allows the bridge to be mounted on a wall or pole in a desired location, one which allows proper connectivity with a ZS300 Sensor and provides optimal range coverage.
Mount the wall bracket using four 3/4 in. long #6 round head sheet metal screws and drywall anchors (not included) where indicated. Ensure that the bracket is secure enough to withstand changing environmental conditions.
Insert the slot (1) on the bottom of the Bridge into the tab on the bottom of the bracket.
Press down on the top of the Bridge until it snaps into place in the bracket.
If using Wi-Fi or changing to a Static IP Address, proceed to Setting a Network Connection to first configure your network settings before mounting the bridge on the bracket.