Scanning with Internal Imager (SE4710)
Scanning with Internal Imager (SE4710)

Scanning with Internal Imager (SE4710)

Use the internal imager to capture barcode data.
Configure the imager illumination setting in the DataWedge application.
To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows the user to enable the scanner to decode barcode data and display the barcode content.
To scan with the internal imager:
  1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
  2. Place the barcode in the field of view of the device’s scan window.
    CC6000 Imager capturing
  3. Ensure the barcode is within the area formed by the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions.
    Aiming Pattern
    When the device is in Pick List Mode, the device does not decode the barcode until the center of the illuminated line or dot touches the barcode.
    Pick List Mode with Multiple Barcodes
    By default, a beep sound indicates that the barcode was decoded successfully. The barcode content data appears in the text field.