Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
Getting Started
Resetting the Device
Resetting the Device
Resetting the Device
The device has a recessed reset button (see
Figure 5 CC600 Back View
and
Figure 2 CC6000 Back View
).
To activate the reset button, use the tip of a small paper clip (1 mm in diameter), insert it into the recess, push and hold it for 3 seconds.
The device has a recovery console accessible via pressing Button #1 on the back of the device upon power-up or via ADB connection and command.
The following reset functions are supported:
Soft reset is performed with an ADB command.
Enterprise reset (see
Android Enterprise Reset
for more information).
Factory reset Full Factory reset (see
Android Factory Reset
for more information).
The device recovery mode supports the following functions:
Flash image from zip file on an SD card or from an internal flash.
Apply a system update from an SD card or from an internal flash.
Getting Started