Installing Brackets onto a Rack Mount

Use screws provided with rack system. Refer to rack user documentation for instructions.

Secure mounting brackets to both sides of the top tray with four M5 screws (two on each side).

1	Fifth screw hole
2	Flange

1	Top screw hole
2	Flange

Install mounting bracket with 10-Slot cradle at a maximum height of four feet from the ground.

Distance between two horizontal mounted brackets should be at least 14.5” apart (from top of one flange to the top of the next flange).

Distance between two 25° mounted brackets should be at least 12” apart (from top of one flange to the top of the next flange).

Install two rack system screws for top of mounting brackets. The screw heads should protrude half way from the rail.

Align the mounting bracket’s top mounting key holes with the screws.

Place the brackets on the screws.

Secure the top screws.

Install bottom screws and tighten screws.

Route cables and connect to power source.

Installer should ensure that all building codes are followed when connecting the power supplies to an AC power source.

While installing the brackets, power supplies and cables:

Use tie wraps to secure cables to the bracket and rails.

Coil cables wherever possible.

Route power cables along the rails.

Route inter-cradle cables to the side rails and then from the rails to the bracket.