Installing the 4-Slot Battery Charger
Installing the 4-Slot Battery Charger

Installing the 4-Slot Battery Charger

Install the 4-Slot Battery charger onto a 5-Slot Charge Only Cradle base. This provides a total of four device charging slots and four battery charging slots.
The Battery Charger must be installed in the first slot only.
  1. Remove power from the cradle.
  2. Using a Phillips screwdriver, remove the screw securing the cup to the cradle base.
  3. Slide the cup to the front of the cradle.
    Remove Cup
  4. Carefully lift the cup up to expose the cup power cable.
  5. Disconnect the cup power cable.
    Place the power cable into the adapter to avoid pinching the cable.
  6. Connect the Battery Adapter power cable to the connector on the cradle.
  7. Place the adapter onto the cradle base and slide it toward the rear of the cradle.
  8. Using a Phillips screwdriver, secure the adapter to the cradle base with a screw.
  9. Align mounting holes on the bottom of the 4-Slot Battery Charger with the stubs on the Battery Adapter.
  10. Slide the 4-Slot battery charger down toward the front of the cradle.
  11. Connect the output power plug into the power port on the 4-Slot Battery Charger.
  12. Reconnect the power to the cradle.