Scanning with Internal Camera
Scanning with Internal Camera

Scanning with Internal Camera

Use the internal camera to capture barcode data.
When capturing barcode data in poor lighting, turn on Illumination mode in the DataWedge application.
  1. Launch a scanning application.
  2. Point the camera window at a barcode.
  3. Press and hold the scan button.
    By default, a preview window appears on the screen. The Decode light emitting diode (LED) lights red to indicate that data capture is in process.
  4. Move the device until the barcode is visible on the screen.
  5. If Picklist mode is enabled, move the device until the barcode is centered under the aiming dot on the screen.
  6. The Decode LED lights green, a beep sounds and the device vibrates, by default, to indicate the barcode is decoded successfully.
    The captured data appears in the text field.