Replacing the microSD Card
Replacing the microSD Card

Replacing the microSD Card

  1. Press the Power button until the menu appears.
  2. Touch
    Power off
    .
  3. Touch
    OK
    .
  4. If hand strap is attached, slide the hand strap clip up toward the top of the device and then lift.
  5. Press the two battery latches in.
  6. Lift the battery from the device.
  7. If the device has a secure access door, use a Microstix 0 screwdriver to remove the 3ULR-0 screw.
  8. Lift the access door.
  9. Slide the microSD card holder to the Open position.
  10. Lift the microSD card holder.
  11. Remove microSD card from holder.
  12. Insert the replacement microSD card into the card holder door ensuring that the card slides into the holding tabs on each side of the door.
  13. Close the microSD card holder door and slide the door to the Lock position.
  14. Replace the access door.
  15. Press the access door down and ensure that it is properly seated.
    Access door must be replaced and securely seated to ensure proper device sealing.
  16. If the device has a secure access door, use a Microstix 0 screwdriver to install the 3ULR-0 screw.
  17. Insert the battery, bottom first, into the battery compartment in the back of the device.
  18. Press the battery down until the battery release latch snaps into place.
  19. Replace the hand strap, if required.
  20. Press and hold the Power button to turn on the device.