Install the Four Slot Battery charger onto a 5-Slot Charge Only Cradle base. This provides a total for four device charging slots and four battery charging slots.
The Battery Charger must be installed in the first slot only.
Remove power from the cradle.
Using a Phillips screwdriver, remove the screw securing the cup to the cradle base.
Slide the cup to the front of the cradle.
Remove Cup
Carefully lift the cup up to expose the cup power cable.
Disconnect the cup power cable.
Place power cable into adapter to avoid pinching cable.
Connect the Battery Adapter power cable to the connector on the cradle.
Place adapter onto cradle base and slide toward rear of cradle.
Using a Phillips screwdriver, secure adapter to cradle base with screw.
Align mounting holes on the bottom of the Four Slot Battery Charger with the stubs on the Battery Adapter.
Slide the Four Slot battery Charger down toward the front of the cradle.
Connect the output power plug into the power port on the Four Slot Battery Charger.
