This section describes how to install a battery into the device and how to remove it.
Do not put any labels, asset tags, engravings, stickers, or other objects in the battery well. Doing so may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Protection (IP)), impact performance (drop and tumble), functionality, or temperature resistance could be affected.
To install a battery:
Insert the battery, bottom first, into the battery compartment in the back of the device.
Press the battery down until it snaps into place.
To remove a battery:
Press the two battery latches down.
Do not attempt to insert fingers under the latches when pulling on the battery. Damage to the latches may occur.
While pressing the latches down, press the two latches in toward the center of the device. The latches must be pressed in completely to release the battery.
