Bracket Wall Mounting
Bracket Wall Mounting

Bracket Wall Mounting

  1. Drill holes and install anchors according to the template supplied with the bracket.
  2. Install two screws for bottom of bracket. The screw heads should protrude 2.5 mm (0.01”) from the wall.
    Vertical Wall Mounting Dimensions
  3. Align the mounting bracket’s bottom mounting key holes with the screws.
  4. Hang the bracket on the screws.
    Vertical Installation
  5. Install two top screws.
  6. Tighten all screws.
    Horizontal Installation - Tighten Screws
  7. Assemble the top tray. See steps 6 through 8 in Installing 5-Slot Cradle Rack.
  8. Slide the assembled top tray onto bottom tray.
  9. Connect cables to cradle.
  10. Secure top tray to bottom tray with four M5 screws (two on each side).
  11. Route cables and connect to power source.
    Installer should ensure that all building codes are followed when connecting the power supplies to an AC power source.
    While installing the brackets, power supplies and cables:
    • Use tie wraps to secure cables to the bracket.
    • Coil cables wherever possible.
    • Route power cables along wall and secure.