Device Accessories

Provides device and spare battery charging and USB communication with a host computer. Use with power supply, p/n PWR-BGA12V50W0WW and country specific grounded AC line cord.

Provides device and spare battery charging and USB communication with a host computer. Use with power supply, p/n PWR-BGA12V50W0WW and country specific grounded AC line cord.

Charges up to five devices. Use with power supply, p/n PWR-BGA12V108W0WW, DC line cord, p/n 50-16002-029R and country specific grounded AC line cord.

Provides device charging and provides Ethernet communication for up to five devices. Use with power supply, p/n PWR-BGA12V108W0WW, DC line cord, p/n 50-16002-029R and country specific grounded AC line cord.

Charges up to four devices and four spare batteries. Use with power supply, p/n PWR-BGA12V108W0WW, DC line cord, p/n 50-16002-029R and country specific grounded AC line cord.

Provides device charging and provides Ethernet communication for up to four devices. Provides charging for four spare batteries. Use with power supply, p/n PWR-BGA12V108W0WW, DC line cord, p/n 50-16002-029R and country specific grounded AC line cord.

Charges up to four spare batteries. Requires power supply, p/n PWR-BGA12V50W0WW and country specific grounded AC line cord.

Provides USB communication and power to the device. Requires power supply PWR-BUA5V16W0WW and country specific un-grounded AC line cord.

Snaps onto the device and provides audio to a wired headset with Quick Disconnect connector.

Snaps onto the device and provides audio to a wired headset with 3.5 mm plug.

Use for mounting a 2-Slot cradle on a desk.

Use for mounting a 5-Slot cradle on a desk or rack.

Use for mounting a 5-Slot cradle or four 4-Slot Battery Chargers on a rack.

Un-powered desktop presentation stand. Allows to use the device on a flat surface (i.e. desktop) for hands-free scanning.

Un-powered cart mount. Allows to use the device on carts with up to 2” diameter rail/bar and allows to use the device on hands-free scanning mode. Includes RAM Mount required for installation.

Un-powered forklift mount. Allows to install the device on a roll bar or square surface of a forklift and allows to use the device on landscape or portrait mode.

Un-powered forklift mount. Allows to install the device on a roll bar or square surface of a forklift and allows to use the device on landscape or portrait mode.

Replacement hand strap.

Optional lanyard for holding the device.

Use to hold the device. Requires the Universal Belt.

Use to hold the device. Requires the Universal Belt.

Use to hold the device and for hands-free scanning. Requires the Universal Shoulder Strap or Universal Belt.

Use to hold the Quick Draw Soft Holster or the Presentation Soft Holster.

Use to hold the Presentation Soft Holster.

Provides power to the device using the USB and Charging Cable. Requires country specific un-grounded AC line cord.

Provides power to the 2–Slot cradles and 4-Slot Spare Battery Charger. Requires country specific grounded AC line cord.

Provides power to the 5-Slot Charge Only Cradle, 5-Slot Ethernet Cradle, 5-Slot Charge Only Cradle with Battery Charger and the 5-Slot Ethernet Cradle with Battery Charger. Requires DC Line Cord, p/n 50-16002–029R and country specific grounded AC line cord.

Provides power from the PWR-BGA12V108W0WW power supply to two 4-Slot Battery Chargers.

Provides power from the power supply to the 5-Slot Charge Only Cradle, 5-Slot Ethernet Cradle, 5-Slot Charge Only Cradle with Battery Charge and 5-Slot Ethernet Cradle with Battery Charger.

Stylus for use with the device (3-pack).

Provides additional protection for display (5-pack).

Field replaceable desiccant cartridge for condensation resistant TC8300 models.