Installing 4-Slot Battery Chargers Rack
Installing 4-Slot Battery Chargers Rack

Installing 4-Slot Battery Chargers Rack

Use the Rack/Wall Mount Bracket to mount four 4-Slot Battery Chargers on a rack. When installing on a rack, first assemble the bracket and chargers and then install the assembly on the rack.
  1. Place one power supply (1) horizontally in bottom tray.
  2. Place one power supply (2) vertically in bottom tray.
  3. Connect AC line cords (3) to power supplies.
  4. Connect DC line cords to power supplies.
  5. Secure power supplies and cables to bottom tray with tie wraps.
  6. Route cables through cable slots.
    Power Supplies in Bottom Tray
  7. Slide top tray onto bottom tray until top tray touches vertical power supply.
    Slide Top Tray onto Bottom Tray
  8. Install 16 M2.5 (1) studs onto top tray as shown below.
    Install Studs
  9. Align and install 4-Slot Battery Charger onto four studs.
    Align Chargers on Studs
  10. Connect DC Y cables (1) to four 4-Slot Battery Chargers.
    Connect Cables
  11. Secure top tray to bottom tray with four M5 screws (two on each side).
    Secure Top Tray to Bottom Tray
See Installing Rack Mount for installing the bracket onto a rack.