Installing 5-Slot Cradle Rack
Installing 5-Slot Cradle Rack

Installing 5-Slot Cradle Rack

Use the Rack/Wall Mount Bracket to mount a 5-slot cradle on a rack. When installing on a rack, first assemble the bracket and cradles/chargers and then install the assembly on the rack.
  1. Place the power supply (1) in bottom tray.
  2. Connect AC line cord (2) to power supply (1).
  3. Connect DC line cord (3) to power supply (1).
    Power Supply in Bottom Tray
  4. Secure power supply and cables to bottom tray with tie wraps.
    Ensure tie wrap buckle is on side of power supply. Tie wrap buckle on top of power supply interferes with top tray.
  5. Route cables through cable slots.
  6. Secure four M2.5 studs (1) to top tray as shown.
    Install Studs
  7. Align and install 5-Slot cradle onto studs of top tray.
    Align Cradle on Studs
  8. Secure cradle to top tray with two M2.5 safety screws (1).
    Secure Cradle
  9. Slide top tray onto bottom tray.
    Slide Top Trap onto Bottom Tray
  10. Connect cables to cradle.
    Connect Cables
  11. Secure top tray to bottom tray with 4 M5 screws (two on each side).
    Secure Top and Bottom Tray
See Rack Mount Installation on page 132 for installing the bracket assembly onto a rack.