Installing Rack Mount

Use screws provided with rack system. Refer to rack user documentation for instructions.

Secure mounting brackets to both sides of top tray with four M5 screws (two on each side).

For 5-Slot cradles, position the flange for vertical installation.

1	Top screw hole
2	Flange

For 4-Slot Battery Chargers, position the flange for 25° installation.

1	Flange
2	Fourth Screw Hole

Install two rack system screws for top of mounting brackets. The screw heads should protrude half way from the rail.

Align the mounting bracket’s top mounting key holes with the screws.

Place the brackets on the screws.

Secure the top screws.

Install bottom screws and tighten screws.

Route cables and connect to power source.

Installer should ensure that all building codes are followed when connecting the power supplies to an AC power source.

While installing the brackets, power supplies and cables:

Use tie wraps to secure cables to the bracket and rails.

Coil cables wherever possible.

Route power cables along the rails.

Route inter-cradle cables to the side rails and then from the rails to the bracket.