Installing the microSD Card
Installing the microSD Card

Installing the microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the back bezel of the unit. Refer to the documentation provided with the card for more information, and follow the manufacturer's recommendations for use.
Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
The Condensation Resistant configuration has six screws securing the back bezel.
When installing a microSD card on Condensation Resistant configurations, replace the Back Bezel with desiccant pack. See Condensation Resistant Rear Bezel Replacement. Once the Rear Bezel is removed, the desiccant pack absorbs ambient moisture and can lessen the life of the desiccant pack.
  1. Remove the Torx T8 screws holding the back bezel in place.
    Remove ScrewsRemove Screws
  2. Lift the bezel to expose the SD slot.
    Remove Bezel
  3. Insert the microSD card into the slot with contacts facing the bottom of the device.
    Insert microSD Card
  4. Align the bezel onto the device.
    Align Bezel
  5. Tighten the four screws using T8 hex screwdriver.
  6. Torque screws to 4.5 kg-cm.
    Secure BezelSecure Bezel