Pairing Using Simple Serial Interface
Pairing Using Simple Serial Interface

Pairing Using Simple Serial Interface

An RS507 Hands-free Imager can be used with the device to capture barcode data.
  1. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
  2. Swipe up from the bottom of the Home screen and touch .
  3. Swipe up from the bottom of the Home screen and touch .
    Bluetooth Pairing Utility
  4. Using the RS507, scan the barcode on the screen.
    The RS507 emits a high/low/high/low beeps. The Scan LED flashes green indicating that the RS507 is attempting to establish connection with the device. When connection is established, the Scan LED turns off and the RS507 emits one string of low/high beeps.