Connecting Using Simple Serial Interface

Pair the USB scanner to the device using Simple Serial Interface (SSI).

Make sure that DS3608 scanner has firmware version CAACJS00-004-R00D0.DAT or higher.

To connect a USB scanner using SSI mode:

On the back of the VC8300, remove the dust cover.

Connect the scanner cable USB connector to either USB port. The scanner beeps.

Place cable into strain relief.

Replace the dust cover.

Ensure that the scanner is in SSI mode. Refer to the scanner Product Reference Guide and scan the SSI Over USB CDC barcode.

On the VC8300 home screen, swipe up from the bottom of the Home screen and touch

Select a profile.

Configure additional settings.