Scanning with the RS507/RS507X Hands-Free Imager
Scanning with the RS507/RS507X Hands-Free Imager

Scanning with the RS507/RS507X Hands-Free Imager

Use the RS507/RS507X Hands-Free Imager to capture barcode data.
RS507/RS507X Hands-Free Imager
Refer to the RS507/RS507X Hands-free Imager Product Reference Guide for more information.
To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows the user to enable the scanner to decode barcode data and display the barcode content.
To scan with the RS507/RS507x:
  1. Pair the RS507/RS507X with the device.
  2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
  3. Point the RS507/RS507X at a barcode.
  4. Press and hold the trigger.
    The red laser aiming pattern turns on to assist in aiming. Ensure the barcode is within the area formed by the cross-hairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions.
    RS507/RS507X Aiming Pattern
    When the RS507/RS507X is in Pick List mode, the RS507/RS507X does not decode the barcode until the center of the crosshair touches the barcode.
    RS507/RS507X Pick List Mode with Multiple Barcodes in Aiming Pattern
    The RS507/RS507X LEDs light green and a beep sounds to indicate the barcode was decoded successfully.
    The captured data appears in the text field.