1. Resetting the RS2100
Resetting the RS2100

Resetting the RS2100

Reset the RS1200 when it stops responding to input or when reprogramming the device.
If the device is unresponsive, perform a cold boot. However, if you need to reset the scanner to scan a programming barcode, begin at step 1.
  1. Ensure the scanner is on.
  2. Scan the Set Factory Default barcode.
  3. Performing a cold boot:
  4. Press and hold the Scan Trigger for 15 seconds until the LED turns red.
  5. Release the Scan Trigger.