r-zt2x1-Print-Specifications
Print Specifications
View content for :
Product:

Print Specifications

Print resolution
203 dpi (dots per inch) (8 dots/mm)
300 dpi (12 dots/mm)
Programmable constant print speeds  (per second)
203 dpi
51 mm to 305 mm in 25.4-mm increments
2.0 in. to 12 in. in 1-in. increments
300 dpi
51 mm to 203 mm in 25.4-mm increments
2.0 in. to 8 in. in 1-in. increments
Programmable constant print speeds  (per second)
203 dpi
51 mm to 254 mm in 25.4-mm increments
2.0 in. to 10 in. in 1-in. increments
300 dpi
51 mm to 152 mm in 25.4-mm increments
2.0 in. to 6 in. in 1-in. increments
Dot size (nominal)
(width x length)
203 dpi
0.125 mm x 0.125 mm
(0.0049 in. x 0.0049 in.)
300 dpi
0.084 mm x 0.099 mm
(0.0033 in. x 0.0039 in.)
Maximum print width
104 mm (4.09 in.)
Maximum continuous print length*
203 dpi
3988 mm (157 in.)
300 dpi
1854 mm (73 in.)
Barcode modulus (X) dimension
203 dpi
5 mil to 50 mil
300 dpi
3.3 mill to 33 mil
First dot location (measured from the inside edge of the media)
2.5 mm ± 1.016 mm
(0.10 in. ± 0.04 in. )
Media registration tolerance**
Vertical
± 1 mm (± 0.039 in.) on non-continuous media
Horizontal
± 1 mm (± 0.039 in.) within a roll of media
* Maximum label lengths are affected by option selections and firmware overhead.
** Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.