comm.stop_bits
comm.stop_bits

comm.stop_bits

This command refers to the communication port stop bits of the printer.
Once the printer’s communication port parameters have been changed, the host terminal must also be configured to match the new printer settings before the host can communicate again.

Setvar

To instruct the printer to configure the
comm.port
stop bit value:
! U1 setvar "comm.stop_bits" "value"
Values
  • "1"
  • "2"
Default
"1"

Getvar

To instruct the printer to respond with the currently set stop bit value:
! U1 getvar "comm.stop_bits"
Example
In this example, the
getvar
retrieves the currently set stop bit value.
! U1 getvar "comm.stop_bits"
This
setvar
example configures the
comm.port
for 1 stop bit.
! U1 setvar "comm.stop_bits" "1"