device.applicator.rfid_void
device.applicator.rfid_void

device.applicator.rfid_void

This command will specify if a
"high"
or
"low"
value is used for the RFID void signal, which occurs when an RFID label is voided by the printer.
This command is supported only on the ZT411/ZT421 and ZT600 Series printers.

Setvar

To set the value:
! U1 setvar "device.applicator.rfid_void" "value"

Values

  • "high"
  • "low"

Default

"low"

Getvar

To instruct the printer to respond with the currently set value:
! U1 getvar "device.applicator.rfid_void"