device.applicator.start_print_mode
device.applicator.start_print_mode

device.applicator.start_print_mode

Selects the applicator port START PRINT mode of operation.

Setvar

To select the start print mode of operation:
! U1 setvar "device.applicator.start_print_mode" "value"
Values
  • "level"
    the Start Print signal does not need to be de-asserted to print the next label. As long as the Start Print signal is low and a label is formatted, a label prints.
  • "pulse"
    the Start Print signal must be de-asserted before it can be asserted for the next label
Default
"pulse"

Getvar

To retrieve the current setting value:
! U1 getvar "device.applicator.start_print_mode"
Result
"level"
Example
In the setvar example below, the
"level"
start print mode of operation is set.
! U1 setvar "device.applicator.start_print_mode" "level"