device.print_reprogram_2key
device.print_reprogram_2key

device.print_reprogram_2key

This command determines whether the printer will print a configuration label or 2key report after the printer restarts following a firmware update.
When set to
"off"
the printer will not print the configuration label or 2key report after the printer is updated.

Setvar

To set whether a two-key report is printed or not:
! U1 setvar "device.print_reprogram_2key" "value"
Values
  • "yes"
  • "no"
Default
"no"

Getvar

To retrieve the current setting for processing two-key report after printer firmware is reprogrammed:
! U1 getvar "device.print_reprogram_2key"
Example
This example disables printing of the two-key report after printer firmware is reprogrammed.
! U1 setvar "device.print_reprogram_2key" "no"