display.backlight_on_time
display.backlight_on_time

display.backlight_on_time

This command sets the amount of time before the backlight turns off. Valid only on printers with a display installed.

Setvar

To set the display length in seconds:
! U1 setvar "display.backlight_on_time" "time"
Values
0-8191
Default
0
If the value is set to 0, the backlight will remain on.

Getvar

To return the display length in seconds:
! U1 getvar "display.backlight_on_time"
Example
This
setvar
example shows the value set to one minute (60 seconds).
! U1 setvar "display.backlight_on_time" "60"