mcr.out
mcr.out

mcr.out

Specifies the communication port which MCR (Mag Card Reader) output is sent to.

Setvar

To specify the communication port which MCR (Mag Card Reader) output is sent to:
! U1 setvar "mcr.out" "value"
Values
"active"
means the data is sent out over the same port that the command was received on.
If “multiple” is specified in the option string of the
mcr.enable
command, data will continue to be be sent to the port defined by this command.
"alert"
means the data will be forwarded as a weblink alert.
Default
"active"