usb.mirror.appl_path
usb.mirror.appl_path

usb.mirror.appl_path

This command specifies the path to the location on a USB device from which Mirror files are retrieved. If no path is specified, then the path is
zebra/appl
.

Setvar

To specify the path to the location on a USB device from which Mirror files are retrieved:
! U1 setvar "usb.mirror.appl_path" "path"
Values
A valid path up to 255 characters.
Default
"zebra/appl"

Getvar

To retrieve the current setting value:
! U1 getvar "usb.mirror.appl_path"