usb.mirror.feedback.auto
usb.mirror.feedback.auto

usb.mirror.feedback.auto

This command determines if a feedback file is written to the USB device connected to the printer after mirroring.

Setvar

To specify if the feedback file is written to the USB device or not:
! U1 setvar "usb.mirror.feedback.auto" "value"
Values
  • "on"
    A feedback file is written to the USB device connected to the printer.
  • "off"
    A feeback file is not written to the USB device connected to the printer.

Getvar

To return the current setting value:
! U1 getvar "usb.mirror.feedback.auto"