zpl.format_prefix
zpl.format_prefix

zpl.format_prefix

This command sets or returns the format character to the character corresponding to the ASCII Hex value xx. This command is similar to the
^CC
and
~CC
commands.

Setvar

To set the format character to the character corresponding to the ASCII Hex value xx:
! U1 setvar "zpl.format_prefix" "xx"
Values
"xx"
=
"00-FF"
,
"00-ff"
,
"up"
,
"down"
  • Specifying the up or down will increment or decrement the current value.
  • Note that the increment/decrement will skip over conflicting values.
  • Conflicting values for
    zpl.format_prefix
    are
    zpl.command_prefix
    , and
    zpl.delimiter
    .

Getvar

To return the current value of the format character:
! U1 getvar "zpl.format_prefix"
Result
^ (5E)