^RQ
^RQ

^RQ

Use this command with an Alien Higgs RFID tag and appropriate firmware to write the EPC data, access password, and kill password with one command. Doing so reduces the encoding time.

Quick Write EPC Data and Passwords

The access password on the tag to be written to must be 00000000 prior to sending this command.
Format:
^RQf,c,o[data]
Parameters
Details
f
= format
Values:
A =
ASCII
H =
Hexadecimal
E =
EPC
Defaults:
H
c
= chip type
Values:
0
(Higgs IC tag)
Default:
0
o
= option
Values:
0
(write 96-bit EPC)
Default:
0
data
= the EPC data, access password, and kill password
Use the
^FD
command to specify the passwords in the following format:
^FD[EPC],[access],[kill]
where:
EPC
= the EPC data in the format specified by the
f
parameter. The data should match what would be programmed with the ^RF command.
access
= an optional access password in hexadecimal format. If this field is left blank, 0x00000000 is written as the access password.
kill
= an optional kill password in hexadecimal format. If this field is left blank, 0x00000000 is written as the kill password.
Example:
This example writes the EPC data to the tag in hexadecimal format. The unspecified access and kill passwords are written as zeros (0x00000000).
^XA^RQ^FD112233445566778899001122^XZ
Example:
This example writes the EPC data to the tag in hexadecimal format. The access password is written as 0xAAAAAAAA, and the kill password is written as 0xBBBBBBBB.
^XA^RQ^FD112233445566778899001122,AAAAAAAA,BBBBBBBB^XZ
Example:
This example writes the EPC data to the tag in EPC format. The unspecified access and kill passwords are written as zeroes (0x00000000).
^XA^RB96,30,30,30,6^RQE^FD1234.5678.9012.12^XZ
Example:
This example writes the EPC data to the tag in hexadecimal format. The access password is written as 0xAAAAAAAA, and the unspecified kill password is written as zeroes (0x00000000).
^XA^RB96,30,30,30,6^RQE^FD1234.5678.9012.12,AAAAAAAA^XZ