^MF
^MF

^MF

The
^MF
command dictates what happens to the media at power-up and at head-close after the error clears.

Media Feed

Format:
^MFp,h
Parameters
Details
p =
feed action at power-up
Values:
F =
feed to the first web after sensor
C =
(see~JC definition)
L =
(see~JL definition)
N =
no media feed
S =
short calibration
1
Default:
C
h =
feed action after closing printhead
Values:
F =
feed to the first web after sensor
C =
(see ~JC definition)
L =
(see ~JL definition)
N =
no media feed
S =
short calibration
1
Default:
C
1. These values are supported only on Xi4, RXi4, XiIIIPlus, PAX, ZM400/ZM600, RZ400/RZ600, and S4M printers.
Comments:
It is important to remember that if you choose the
N
setting, the printer assumes that the media and its position relative to the printhead are the same as before power was turned off or the printhead was opened. Use the
^JU
command to save changes.