~SD
~SD

~SD

The
~SD
command allows you to set the darkness of printing.
~SD
is the equivalent of the darkness setting parameter on the control panel display.

Set Darkness

Format:
~SD##
Parameters
Details
## =
desired darkness setting (two-digit number)
Values:
00
to
30
Default:
last permanently saved value
The darkness setting range for the XiIIIPlus, Xi4, and RXi4 is 0 to 30 in increments of 0.1. The firmware is setup so that the
^MD
and
~SD
commands (ZPL darkness commands) accept that range of settings.
Example:
These are examples of the XiIIIPlus, Xi4, and RXi4 Darkness Setting:
^MD8.3 ~SD8.3
Comments:
The
^MD
command value, if applicable, is added to the
~SD
command.