internal_wired.ip.default_addr_enable
internal_wired.ip.default_addr_enable

internal_wired.ip.default_addr_enable

This command allows you to default the internal wired print server’s IP address.
For a set IP address to take affect, the IP protocol must be set to permanent and the print server must be reset.

Setvar

To tell the printer to use it’s default address:
! U1 setvar "internal_wired.ip.default_addr_enable" "value"
Values
  • "on"
    means enabled
  • "off"
    means disabled
Default
"on"

Getvar

To instruct the printer to show the status of the setting of internal wired print server’s default IP address feature:
! U1 getvar "internal_wired.ip.default_addr_enable"
Example
This
setvar
example shows the value set to
"on"
.
! U1 setvar "internal_wired.ip.default_addr_enable" "on"
What the
setvar
value is set to is the
getvar
result. In this example, the
getvar
result is
"on"
.