internal_wired.ip.dhcp.cid_type
internal_wired.ip.dhcp.cid_type

internal_wired.ip.dhcp.cid_type

This printer setting defines the type of client identifier (DHCP option 61) that will be sent if DHCP is enabled on the internal wired print server. A value of
"1"
means the type of "Ethernet" and the printer’s MAC address will be used.A value of
"0"
or
"2"
means the client identifier sent will be
"internal_wired.ip.dhcp.cid_prefix"
concatenated with
"internal_wired.ip.dhcp.cid_suffix"
.

Setvar

To instruct the printer to enable "synthetic" Client Identifier for the internal wired print server:
! U1 setvar "internal_wired.ip.dhcp.cid_type" "value"
Values
  • "0"
    ASCII string
  • "1"
    wired print server’s MAC address
  • "2"
    HEX value

Getvar

To instruct the printer to respond with the client identifier type for the internal wired print server:
! U1 getvar "internal_wired.ip.dhcp.cid_type"
Example
This
setvar
example shows the value set to
"1"
.
! U1 setvar "internal_wired.ip.dhcp.cid_type" "1"
When the
setvar
value is set to
"1"
, the
getvar
result is
"1"
.