internal_wired.ip.dhcp.option12_format
internal_wired.ip.dhcp.option12_format

internal_wired.ip.dhcp.option12_format

This command specifies the value which will be used for option 12 (host name) to be used in the DHCP discovery packet of the internal wired print server.

Setvar

To instruct the printer to set value which will be used for option 12 (host name) to be used in the DHCP discovery packet of the internal wired print server:
! U1 setvar "internal_wired.ip.dhcp.option12_format" "value"
Values
0 to 109 alphanumeric characters
Default
""

Getvar

To retrieve the value which will be used for option 12 (host name) to be used in the DHCP discovery packet of the internal wired print server:
! U1 getvar "internal_wired.ip.dhcp.option12_format"
Example
This
setvar
example shows configuring the internal_wired.ip.dhcp.option12_format to the value contained in the
device.friendly_name
parameter.
It is necessary to surround the SGD entry to be used as source for the data with the < and > characters.
! U1 setvar "internal_wired.ip.dhcp.option12_format" "<device.friendly_name>"
To further explain, if the above command was issued and the value currently stored in the
device.friendly_name
parameter was
"ShipPrinter"
, then the response to following command would be
"ShipPrinter"
:
! U1 getvar "internal_wired.ip.dhcp.option12_value"