internal_wired.ip.dhcp.option12
internal_wired.ip.dhcp.option12

internal_wired.ip.dhcp.option12

This command specifies if the DHCP option 12 (host name) is on or off in the discovery packet that is sent from the internal wired print server.

Setvar

To instruct the printer to set the DHCP option 12 (host name) in the discovery packet of the internal wired print server:
! U1 setvar "internal_wired.ip.dhcp.option12" "value"
Values
  • "on"
    turns on option 12
  • "off"
    turns off option 12
Default
"on"

Getvar

To retrieve the status of the DHCP option 12 (host name) in the discovery packet of the internal wired print server:
! U1 getvar "internal_wired.ip.dhcp.option12"
Example
This
setvar
example shows the value set to
"on"
.
! U1 setvar "internal_wired.ip.dhcp.option12" "on"
When the
setvar
value is set to
"on"
, the
getvar
result is
"on"
.