bluetooth.minimum_security_mode
bluetooth.minimum_security_mode

bluetooth.minimum_security_mode

This printer setting parameter sets the Bluetooth Minimum Security mode. Minimum Security Mode provides for three levels of security, depending on the printer radio version and printer firmware: “1”, “2”, and “3”.
This feature is available in printers with Bluetooth® radio version 2.0 or higher.

Setvar

To set the Bluetooth Minimum Security mode:
! U1 setvar "bluetooth.minimum_security_mode" "value"
Values
"1"
Security mode 1 means the printer will:
  • be discoverable
  • not require a PIN to connect to
"2"
means the printer will:
  • switch to bluetooth.authentication = “setpin” (Connecting device must provide the printer’s bluetooth.bluetooth_pin),
  • switch to Bluetooth.encryption = “on”, and
  • use existing Bluetooth.discoverable setting
"3"
means Link Level Enforced Security and the printer will:
  • switch to bluetooth.authentication = “setpin” (Connecting device must provide the printer’s bluetooth.bluetooth_pin)
  • switch to bluetooth.encryption = “on”
  • switch to bluetooth.discoverable = “off”
  • only connect to devices which use Link Level Enforced Security
"4"
  • switch to bluetooth.authentication = “setpin” (Connecting device must provide the printer’s bluetooth.bluetooth_pin)
  • switch to bluetooth.encryption = “on”
  • switch to bluetooth.discoverable = “off”
  • only connect to devices which use Link Level Enforced Security
  • will not connect to a device with Bluetooth version 2.1 or lower
Default
"1"

Getvar

To retrieve the current Bluetooth Minimum Security Mode:
! U1 getvar "bluetooth.minimum_security_mode"
Example
This
setvar
example shows the value set to
"2"
.
! U1 setvar "bluetooth.minimum_security_mode" "2"