ip.addr
ip.addr

ip.addr

This command allows you to get or set the printer’s IP address.
For a set IP address to take affect, the IP protocol must be set to permanent and the print server must be reset.

Setvar

To instruct the printer to change its current IP address upon powering the printer on:
! U1 setvar "ip.addr" "value"
Values
Any valid IP address
Default
"0.0.0.0"

Getvar

To instruct the printer to respond with its current IP address:
! U1 getvar "ip.addr"
The
setvar
value of this command can be affected by the
ip.dhcp.enable
command.
Example
This
setvar
example shows the value set to
"10.14.4.235"
.
! U1 setvar "ip.addr" "10.14.4.235"
What the
setvar
value is set to is the
getvar
result. In this example, the
getvar
result is
"10.14.4.235"
.