ip.dhcp.cid_enable
ip.dhcp.cid_enable

ip.dhcp.cid_enable

This command determines if DHCP (option 61) is turned on or off.

Setvar

To set the status of the client identifier:
! U1 setvar "ip.dhcp.cid_enable" "value"
Values
  • "off"
    client identifier is turned off
  • "on"
    client identifier is turned on
Default
"off"

Getvar

To return the current setting value:
! U1 getvar "ip.dhcp.cid_enable"
Example
This
setvar
example shows the value set to
"off"
.
! U1 setvar "ip.dhcp.cid_enable" "off"
What the
setvar
value is set to is the
getvar
result. In this example, the
getvar
result is
"off"
.