ip.mirror.reset_delay
ip.mirror.reset_delay

ip.mirror.reset_delay

This command specifies the number of seconds between when the printer receives the last byte of the last file from the
/commands
directory and when the printer resets during a mirror event.

Setvar

To set the number of seconds between when the printer receives the last byte of the last file from the
/commands
directory and when the printer resets during a mirror event:
! U1 setvar "ip.mirror.reset_delay" "value"
Values
"0"
to
"900"
(seconds)
Default
"5"
The default setting for the
ip.mirror.reset_delay
command is 5 seconds; in some cases it may be necessary to use a longer delay to allow for full processing of longer or more complex files.

Getvar

To retrieve the number of seconds between when the printer receives the last byte of the last file from the /commands directory and when the printer resets during a mirror event:
! U1 getvar "ip.mirror.reset_delay"
Example
This
setvar
example shows the value set to
"10"
.
! U1 setvar "ip.mirror.reset_delay" "10"
When the
setvar
value is set to
"10"
, the
getvar
result is
"10".