ip.netmask
ip.netmask

ip.netmask

This setting refers to the subnet mask address. This value is ignored if the IP protocol is not set to permanent.

Setvar

To instruct the printer to change the subnet mask:
! U1 setvar "ip.netmask" "value"
Values
Any valid subnet mask.
Default
"255.255.255.0"

Getvar

To respond with the subnet mask value:
! U1 getvar "ip.netmask"
Example
This
setvar
example shows the value set to
"255.255.255.0"
.
! U1 setvar "ip.netmask" "255.255.255.0"
When the
setvar
value is set to
"255.255.255.0"
, the
getvar
result is
"255.255.255.0"
.