weblink.logging.max_entries
weblink.logging.max_entries

weblink.logging.max_entries

This command specifies the maximum number of individual log entries that will be stored in the
weblink.logging.entries
command.
Changes to this command are immediate and may result in some log entries being lost. If there are N log entries currently in the log, the user sets the max_entires to M, where M is less than N, the oldest (N-M) log entries will be removed.
^JUF, ^JUS, ^JUN, ^JUA
, and
device.restore_defaults
do not have any affect on this setting.

Setvar

To set the maximum number of log entires that will be stored:
! U1 setvar "weblink.logging.max_entries" "value"
Values
"0"
through
"10000"
Setting the value to
"0"
disables logging.

Getvar

To return the setting for the maximum number of log entries that will be stored:
! U1 getvar "weblink.logging.max_entries"

Do

To set the maximum number of log entires that will be stored:
! U1 getvar "weblink.logging.max_entries"
Values
"0"
through
"10000"
Setting the value to
"0"
disables logging.
Default
"0"
Example
In this example,
weblink.logging.max_entries
is set to 3:
[01-04-2013 08:40:45.659] [conn1.1] Received HTTP code 404 from proxy after CONNECT [01-04-2013 08:40:45.660] [conn1.1] Closing connection [01-04-2013 08:40:45.662] [conn1.1] Failed to connect (SP = 0, CU = 0, UW = 0, AC = 0, PC = 0)
In this example,
weblink.logging.max_entries
is set to 2:
weblink.logging.entries
becomes:
[01-04-2013 08:40:45.660] [conn1.1] Closing connection [01-04-2013 08:40:45.662] [conn1.1] Failed to connect (SP = 0, CU = 0, UW = 0, AC = 0, PC = 0)