wlan.essid
wlan.essid

wlan.essid

This printer setting refers to the printer’s stored ESSID.

Setvar

To instruct the printer to change the ESSID:
! U1 setvar "wlan.essid" "value"
Values
32 character alphanumeric string
Default
"125"
(Printers running Link-OS v5.3 or earlier versions)
""
(For Printers running Link-OS 6 or later versions)

Getvar

To instruct the printer to respond with the stored ESSID value:
! U1 getvar "wlan.essid"
Example
This
setvar
example shows the value set to
"125"
.
! U1 setvar "wlan.essid" "125"
When the
setvar
value is set to
"125"
, the
getvar
result is
"125"
.
For Link-OS Firmware earlier than 6.0, setting ESSID to "" allows the printer to attempt to connect to an AP with any ESSID. For Link-OS Firmware of 6.0 or later, setting ESSID to "" means that the printer will not attempt a Wi-Fi connection.