wlan.ip.dhcp.cid_type
wlan.ip.dhcp.cid_type

wlan.ip.dhcp.cid_type

This printer setting defines the type of client identifier (DHCP option 61) that will be sent if DHCP is enabled on the wireless print server. A value of
"1"
means the type of Ethernet and the printer’s MAC address will be used. A value of
"0"
or
"2"
means the client identifier sent will be
"wlan.ip.dhcp.cid_prefix"
concatenated with
"wlan.ip.dhcp.cid_suffix"
.

Setvar

To instruct the printer to enable "synthetic" client identifier for the wireless print server:
! U1 setvar "wlan.ip.dhcp.cid_type" "value"
Values
  • "0"
    means ASCII string
  • "1"
    means MAC address of the wireless radio card
  • "2"
    means HEX value
Default
"1"

Getvar

To instruct the printer to respond with the client identifier type for the wireless print server:
! U1 getvar "wlan.ip.dhcp.cid_type"
Example
This
setvar
example shows the value set to
"1"
.
! U1 setvar "wlan.ip.dhcp.cid_type" "1"
What the
setvar
value is set to is the
getvar
result. In this example, the
getvar
result is
"1"
.