wlan.leap_username
wlan.leap_username

wlan.leap_username

This printer setting refers to the LEAP user name. The user name must correspond to a user profile established on the RADIUS/AAA server in use.
This parameter is not supported on units with a Frequency Hopping Spread Spectrum (FHSS) radio.

Setvar

To change the LEAP user name:
! U1 setvar "wlan.leap_username" "values"
Values
0 to 32 alphanumeric ASCII characters.
Default
"user"

Getvar

To respond with the LEAP user name:
! U1 getvar "wlan.leap_username"
Example
This setvar example shows the value set to
"user"
.
! U1 setvar "wlan.leap_username" "user"
When the
setvar
value is set to
"user"
, the
getvar
result is
"user"
.