Activate
PTT Pro for Android
and Create a User

When

Workcloud Communication PTT Pro

is properly configured and connected to a network,

PTT Pro for Android

can activate the device and create and log in the user. This feature requires that the PTT Pro device was not previously activated with the ESN or Android ID.

If the device was previously activated using an activation code, you can configure the device to use the

PTT Pro Manager Service

. The device will be reactivated using the ESN or Android ID.

After you configure the PTT Pro with the parameters described in Configure PTT Pro for the PTT Pro Manager Service, the following steps occur when a user launches PTT Pro for the first time:

PTT Pro connects to the Extension Manager to obtain the site ID (department) corresponding to the device IP address.

PTT Pro connects to the PTT Pro Manager Service to register the device with the ESN or Android ID. and create the user with the site ID.

You must configure the Site IP table in

Workcloud Communication Extension Manager

to map IP addresses to the Site IDs.

PTT Pro logs in to the PTT Pro server using the ESN or Android ID.

The first and last name of the device user will be

sitename.nn

, where

is the following incremental number.

If the user logs out of the device, the activation code field is not displayed on the

Activation Code

screen.