1. FS42 Fixed Industrial Scanner Product Reference Guide
  2. Getting Started
  3. Specifications
  • FS42 Fixed Industrial Scanner Product Reference Guide
Specifications
View content for :
Product:

Specifications

The following table describes physical attributes, performance and user environment specifications, and regulatory certifications for the xS40.
The following table describes the device's physical attributes, performance and user environment specifications, and regulatory certifications.
Specifications
Specification
Description
Physical Characteristics
Dimensions
2.1 in. H x 2.5 in. W x 3.6 in. D
54.0 mm H x 64.0 mm W x 91.4 mm D
Weight
14.1 oz./400.0 g
Power
10 to 30 VDC external power supply, 36W max at 24V
Class 4 PoE+ source, 25.5W max
Class 3 PoE source, 13W max
USB Type-C host, 7.5W max at 5V 1.5A or 15W max at 5V 3.0A
Configurable IO
(4) Four optoisolated GPIO: GPIO0,1,2,3
(5) Five non-isolated GPIO: GPIO4,5,6*,7*,8*
*Unavailable when External Light Mode is enabled
Interface Ports
(1) M12 X-Coded 1000/100/10 Mbps Ethernet
(1) M12 12-pin Power/GPIO
(1) M12 5-pin External Light Power & Control/GPIO
(1) USB 3.0 SuperSpeed Type-C with DisplayPort Alt Mode
Communication Protocols
Ethernet/IP, PROFINET, CC-Link, Modbus TCP, TCP/IP
Performance Characteristics
Image Sensor
Monochrome: 2.3 MP (1920 x 1200 pixels) CMOS Sensor
Acquisition Rate
Up to 60 frames/second
Aimer
Red Class II Laser; 8-point sunburst pattern
Illumination
Field replaceable modules:
(8) 660nm Red LEDs
(8) 850nm IR LEDs
(8) 2700K (Color Temperature) White LEDs
(4) 660nm Red LEDs + (8) 850nm IR LEDs + (8) 2700K (Color Temperature) White LEDs
Imager Field of View
SR (Standard Range): 10.8mm Liquid Lens (30° H x 19° V Nominal)
WA (Wide Angle): 6.8mm Liquid Lens (46° H x 29° V Nominal)
User Environment
Operating Temperature
32° F to 113° F/0° C to 45° C (10-30VDC external power supply, duty cycle-dependent)
32° F to 104° F/0° C to 40° C (POE, duty cycle dependent)
Storage Temperature
-40°F to 158°F / -40° to 70°C
Vibration Resistance
EN 60068-2-6, 14 mm @ 2 to 10 Hz, 1.5 mm @ 13 to 55 Hz; 2 g @ 70 to 500 Hz; 2 hours on each axis
Shock Resistance
EN 60068-2-27, 30g; 11 ms; 3 shocks on each axis
Environmental Sealing
IP65 & IP67
Humidity
5% to 90% RH (Non-Condensing)
Light Immunity
The product operates in Incandescent 450 ft candles, Sunlight <6000 ft candles, Florescent 450 ft candles, LED 450 ft candles
Electrostatic Discharge
±15 kV Air, ±8 kV Contact, ±8 kV Indirect
Trigger Durability
Withstand 1,000 cycles of operation with no degradation in functionality
Regulatory
Environmental
EN 50581:2012
EN IEC 63000:2018
Electrical Safety
IEC 62368-1 (Ed.2)
EN 62368-1:2014/A11:2017
Laser Safety (xS42 Only)
21CFR1040.10 & 21CFR1040.11
IEC/EN 60825-1:2014 (Ed.3)
LED Safety
IEC 62471: 2006 (Ed.1)
EN 62471: 2008
EMI/EMS
EN 55032:2015/A11: 2020
EN 55032:2015/A1: 2020
EN 55035:2017/A11: 2020
EN IEC 61000-3-2: 2019/A1:2021
EN 61000-3-3: 2013/A2:2021/AC:2022-01
EN 61000-6-2: 2005,2019
FCC 47 CFR Part 15, Subpart B
ICES-003, Issue 7
EU Declaration of Conformity
2014/30/EU; 2014/35/EU; 2011/65/EU.
Refer to the Declaration of Conformity (DoC) for details of compliance with the current standards.
The DoC is available at: zebra.com/doc
The following table describes physical attributes, performance and user environment specifications, and regulatory certifications for the xS70.
The following table describes physical attributes, performance and user environment specifications, and regulatory certifications for the xS72.
Specifications
Specification
Description
Physical Characteristics
Dimensions
2.5 in. H x 2.5 in. W x 3.75 in. D
63.0 mm H x 64.0 mm W x 95.0 mm D
Weight
22.9 oz./650.0 g
Power
10 to 30 VDC external power supply, 36W max at 24V
Class 4 PoE+ source, 25.5W max
Class 3 PoE source, 13W max
USB Type-C host, 7.5W max at 5V 1.5A or 15W max at 5V 3.0A
Configurable IO
(4) Four optoisolated GPIO: GPIO0,1,2,3
(5) Five non-isolated GPIO: GPIO4,5,6*,7*,8*
*Unavailable when External Light Mode is enabled
Interface Ports
(2) M12 X-Coded 1000/100/10 Mbps Ethernet
(1) M12 12-pin Power/GPIO/RS-232
(1) M12 5-pin External Light Power & Control/GPIO
(1) USB 3.0 SuperSpeed Type-C with DisplayPort Alt Mode
Communication Protocols
Ethernet/IP, PROFINET, CC-Link, Modbus TCP, TCP/IP
Performance Characteristics
Image Sensor
Monochrome: 2.3 MP (1920 x 1200 pixels) CMOS Sensor with Global Shutter and 3.0 um pixel size
Acquisition Rate
60 frames/second
Illumination
Supports many standard external illumination systems while powered by 24 VDC supply
Imager Field of View
Flexible; dependent upon C-mount lens selection
User Environment
Operating Temperature
32° F to 113° F/0° C to 45° C (10-30VDC external power supply, duty cycle-dependent)
32° F to 104° F/0° C to 40° C (POE, duty cycle-dependent)
Storage Temperature
-40° F to 158° F/-40° C to 70° C
Vibration Resistance
EN 60068-2-6, 14 mm @ 2 to 10 Hz, 1.5 mm at 13 to 55 Hz; 2 g at 70 to 500 Hz; 2 hours on each axis
Shock Resistance
EN 60068-2-27, 30 g; 11 ms; 3 shocks on each axis
Environmental Sealing
IP65 and IP67
Humidity
5% to 90% RH, non-condensing
Light Immunity
The product operates in Incandescent 450 ft candles, Sunlight <6000 ft candles, Florescent 450 ft candles, LED 450 ft candles
Electrostatic Discharge
±15 kV Air, ±8 kV Contact, ±8 kV Indirect
Trigger Durability
Withstand 1,000 cycles of operation with no degradation in functionality
Regulatory
Environmental
EN 50581:2012
EN IEC 63000:2018
Electrical Safety
IEC 62368-1 (Ed.2)
EN 62368-1:2014/A11:2017
EMI/EMS
EN 55032:2015/A11: 2020
EN 55032:2015/A1: 2020
EN 55035:2017/A11: 2020
EN IEC 61000-3-2: 2019/A1:2021
EN 61000-3-3: 2013/A2:2021/AC:2022-01
EN 61000-6-2: 2005,2019
FCC 47 CFR Part 15, Subpart B
ICES-003, Issue 7
EU Declaration of Conformity
2014/30/EU; 2014/35/EU; 2011/65/EU
Refer to the Declaration of Conformity (DoC) for details of compliance with the current standards. The DoC is available at: zebra.com/doc