Installing 4-Slot Battery Chargers on a Rack

Installing 4-Slot Battery Chargers on a Rack

Use the Rack/Wall Mount Bracket to mount four 4-Slot Battery Chargers on a rack. When installing on a rack, first assemble the bracket and chargers and then install the assembly on the rack.
  1. Place one power supply horizontally in the bottom tray.
  2. Place another power supply vertically in the bottom tray.
  3. Connect AC line cords to the power supplies.
  4. Connect DC line cords to the power supplies.
  5. Secure the power supplies and cables to the bottom tray with tie wraps.
  6. Route the cables through the cable slots.
    route cables
    1
    DC Y cable 1
    2
    DC Y cable 2
    3
    Power supply 1
    4
    Power supply 2
    5
    AC line cord 2
    6
    AC line cord 1
  7. Slide the top tray onto the bottom tray until the top tray touches the vertical power supply.
    slide top tray onto bottom tray
  8. Install 16 M2.5 studs onto the top tray as shown.
    install stubs
  9. Align and install a 4-Slot Battery Charger onto each set of four studs.
    align 4-slot battery charger
  10. Connect DC Y cables to the four 4-Slot Battery Chargers.
    connect DC Y cables
  11. Secure the top tray to the bottom tray with four M5 screws (two on each side).
    secure top tray to bottom tray
See Installing the Rack Mount for installing the bracket assembly onto a rack.