1. TC22/TC27 Product Reference Guide
  2. Application Deployment
  3. Android Enterprise Reset
  4. Performing an Enterprise Reset Using ADB
  • TC22/TC27 Touch Computer Product Reference Guide
Performing an Enterprise Reset Using ADB

Performing an Enterprise Reset Using ADB

Perform an Enterprise Reset using ADB.
If you are not able to enter Android Recovery mode through the adb command, see Entering Android Recovery Manually.
  1. Connect the device to a host computer using a USB cable.
  2. Go to
    Settings
    .
  3. Touch
    System
    Advanced
    Developer options
     .
  4. Slide the
    USB debugging
     switch to the
    ON
     position.
  5. If the device and host computer are connected for the first time, the
    Allow USB debugging?
     dialog box with the
    Always allow from this computer
     check box displays. Select the check box, if required.
  6. Touch
    OK
     or
    Allow
    .
  7. On the host computer, navigate to the
    platform-tools
     folder and open a command prompt window.
  8. Type
    adb devices
    .
    The following displays: 
    List of devices attached
XXXXXXXXXXXXXXX device
    Where XXXXXXXXXXXXXXX is the device number.
    If the device number does not appear, ensure that the ADB drivers are installed properly.
  9. Press
    Enter
    .
    The System Recovery screen appears on the device.
  10. Press
    Volume Up
     and
    Volume Down
     to navigate to
    Apply upgrade from ADB
    .
  11. Press
    Power
    .
  12. On the host computer command prompt window type
    adb sideload <file>
    where: <file> = the path and filename of the zip file.
  13. Press
    Enter
    .
    The Enterprise Reset package installs and then the System Recovery screen appears on the device.
  14. Press
    Power
     to reboot the device.